What is the reason for the leaking of showers in bathroom showers?

Many people will find the shower switch turned off after bathing, but it is still ticking the flow of water, so that the ground becomes wet, flooding Jinshan. What's going on here? In fact, there is a phenomenon of water leakage in the shower. There are many reasons for the leakage of the shower. There are many reasons why we should solve this problem and we must make corresponding solutions according to different reasons. What is the reason that the shower leaks? What if the bathroom shower leaks? Today Xiao Bian came to share with you the knowledge of how to do a bathroom shower leak . Let's learn about it together!

What is the reason for the leakage of the shower?

There are roughly three reasons why it leaks. The first one is the material itself is not good, for example, is made of waste, so the service life is not long. Another reason is that the paint on the surface of the shower is very poor, and the phenomenon of paint dripping will result in blockage. We can touch the surface by hand. If the surface is not smooth, it may be a secondary processed product. Another reason is that because of the long use time, the water contains more alkali, and the scale deposits in the outlet hole, which leads to the clogging of the shower.

Toilet shower leak how to do 1

If the water is sprayed in the direction of the ball, we can spin it off and look for O-rings or other seals inside, and replace it if there is any. Turn the shower head back into place.

Bathroom shower leak how to do 2

If there is a leak in the handle, then we have to consider whether the handle is damaged. We can choose hoses and faucets of corresponding sizes, replace their rubber rings, install them again, and we need to clean the threads on the handle of the shower head, and apply a special adhesive for the hose or tie around. Water pipe special tape. Then screw back the shower head and remove any excess adhesive and tape.

Toilet shower leak how to do 3

If it is because there is dirt, sand, or sediment in the blockage, then we can first unscrew it and remove the stains first. For some difficult-to-clean dirt, we can use vinegar to soak the parts. , And scrub parts, be careful not to scratch it. If the showerhead is adjustable spray, carefully inspect the parts for signs of excessive wear. If the rotating handle does not move smoothly or if the internal cam breaks, the entire shower head must be replaced.

Xiao Bian's words: If the water flowing from your shower is uneven, some are coarse and thin, then don't worry. We can rotate the shower head to find the right position and see if the water becomes even. If it still does not work, then we need to open the shower head on its own, and then rinse the shower head with clean water, or brush the shower hole with a toothbrush, and then install and restore. The above is the knowledge of Xiaobian and everyone to explain the bathroom shower leak how to do , and hope to give you some reference! More related content, you can pay attention to Qijia information, follow-up will present more exciting content!

Toilet shower leak how to do