How to operate and maintain PVC plastic mill?

PVC plastic mill is a member of the plastic machinery industry. PVC plastic mill is the leader in the current grinding industry. Before using it, you need to know a lot of knowledge. For example, the operation of PVC plastic mill, the maintenance of mill equipment, etc., many need attention. problem.
PVC plastic mill itself is not very simple, the mill is mainly to filter the required particle size, so that the over-grown material is further re-grinded, so that it can reach a uniform chatter, and for pollution There are certain measures in the aspect, so it is necessary to make each component play its own role in use, so that the PVC plastic mill equipment can be used better to achieve the goal. In addition, in addition to this, we have to understand some conditions for the start-up of PVC plastic mill equipment. In many cases, the PVC plastic mill equipment does not start up. It is related to the operation. Whether it is oil pressure or motor start, it must be guaranteed. Really achieve the starting conditions, so that you can start, otherwise there will be serious consequences, even for personal safety is also a certain danger.
In the use of PVC plastic mill equipment, we must do this to make the mill equipment better in use. Because gypsum blocks have the advantages of light weight, can replace clay bricks, and reduce the destruction of cultivated land, they can be used as non-bearing walls in high-rise buildings, which can increase the effective use area by about 10%. After the physical modification of titanium gypsum, it can produce gypsum blocks that meet the requirements of the standard. The modification process of PVC plastic mill is: drying-crushing-grinding-frying-aging, and the titanium gypsum is at 50 °C- Dry at 60 °C, remove free water, then dry and crush the grinding, fry and age at 200 ° C, then add light aggregate, fly ash, water and water reducing agent, retarder, etc. Admixtures can be used to formulate lightweight wall blocks.
It seems that after the titanium gypsum is crushed, it needs a mill to grind it into powder for the next step of processing. After the titanium gypsum is crushed to the required particle size, it is sent to the storage hopper by the hoist, and then The vibrating feeder feeds the material evenly and continuously into the main grinding chamber of the Raymond mill. Due to the centrifugal force during the rotation, the grinding roller swings outward and presses against the grinding ring. The blade shovels the titanium gypsum material to the grinding roller and the grinding ring. Between the grinding, the grinding roller achieves the purpose of crushing. The fine powder after grinding of the PVC plastic mill gypsum material is brought into the analysis machine for sorting with the circulating wind of the blower. The finely coarse material falls back to the regrind, and the qualified fine powder enters the finished cyclone collector with the airflow. It is discharged through the powder discharging pipe, which is the finished product, that is, the titanium gypsum powder.

PS Sheet is commonly known as "organic board", chemical name Polystyene polystyrene, density 1.02 ~ 1.08 is a thermoplastic, transparency is higher (light transmittance is second only to organic glass), has excellent electrical insulation, high frequency insulation Especially good, the quality is brittle, the impact resistance, weather resistance and aging resistance are inferior to plexiglass, the mechanical processing properties and thermal processing properties are not as good as plexiglass, it can resist general chemical corrosion, the chemical properties are stable, the hardness is similar to plexiglass, The water absorption rate and thermal expansion coefficient are less than plexiglass, and the price is cheaper than plexiglass.

PS Sheet is made of polystyrene as the main raw material, extruded, can be freely colored, odorless, tasteless and non-toxic, does not cause fungus growth, has the advantages of rigidity, insulation, good printability, etc. It is mainly used for packaging, container equipment, Daily decoration, general electrical appliances and construction industries.

Polystyrene Sheet ( PS Plate ) is made by extrusion, main raw material is polystyrene granule. Mainly used for packaging, container equipment, General electrical and construction and other industries.

PS polystyrene decorative board is a high-molecular organic board extruded by polystyrene granule molding compound on the extruder unit.

PS Sheet

PS Sheet,PS Board,PS Panel,PS Polystyrene Sheet

SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , https://www.xyhplastic.com