The principle of factory decoration and decoration

There are many factories in our life that need to be renovated, but the decoration is different from the decoration of our family. The decoration of the factory is not so complicated, but the problem to be considered is that it meets the requirements of the factory. the principle of renovation and decoration, what does? precautions plant renovation and decoration, what does? then you made a small series of renovated home network up to tell you about it.

First, the principle of factory decoration and decoration

1. Most of the factories are large in size and need to make reasonable use of space according to the requirements of the operators. In particular, many factories have a lot of machinery and equipment. Don't set too many partitions and partition walls. It looks too narrow and it is easy to form a labyrinth. If you identify the division area, the color can not be too much, and often simple is the best. More common is the clear equipment area and office area, such planning is easy to manage. In short, the factory layout should take into account the flow of people and ventilation, access and other issues.

2. The factory area is relatively large, the design requirements are not very good, do not need too much art, practical just fine. In other words, the choice of factory decoration materials is very important, especially the ground and top materials. Among them, the ground is very wearable every day, try to choose some durable materials. Sometimes consider the bearing, anti-static and other considerations. Clean and clean is mentioned by a large enterprise, and it should be thought of as much as possible when decorating.

Second, the factory decoration and decoration points

1. The first thing to consider in the decoration workshop is the ground part. The general factory floor does not need to carry the load. Therefore, we can consider the use of cheap materials for decoration, such as composite wood flooring or floor tiles can be used as building floor decoration materials. Of course, if you want to play an anti-static effect, you should choose materials such as anti-static floor or epoxy floor.

2. Scientific division according to the specific practical area. Different materials are used for partitioning and segmentation. Try to choose durable, durable materials, such as: anti-static pvc and other materials. Mineral wool sound absorbing panels are one of the commonly used materials in factory decoration and are recognized by consumers.

3. Regarding the space division inside the factory, we can make a reasonable division according to our actual use. However, it should be noted that if there are a lot of equipment in the factory, you can't set too many partitions and partition walls, and try to divide the area with the color tone of the ground.

Our factory decoration floor decoration is very like this, then the principle of factory decoration and decoration and its decoration precautions, through the introduction of the above small series, everyone knows about these, then if you still want to know more For decoration information, please continue to pay attention to the decoration home Internet cafe.

More related wonderful reading:

Factory decoration and decoration steps plant decoration and decoration matters needing attention