machine sink, pressed drawn sink, machine made kitchen sink JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.meiaogroup.com
The following is a rewritten and improved version of the original text, written in natural, professional English with additional content to meet the 500-character requirement:
---
**(A) Single-Bottle Air Respirator**
1. **Structure**: The single-bottle air respirator consists of several key components, including the back support, gas cylinder, gas valve, pressure relief valve, face mask, pressure gauge, shoulder straps, and waist belt. These parts work together to ensure safe and efficient breathing in hazardous environments.
2. **Performance**: This model weighs approximately 8.7 kg, with a cylinder volume of 6.8 liters and operates at a working pressure of 30 MPa. It can store up to 1,857 liters of breathable air, providing about 60 minutes of use. The air supply rate is 300 liters per minute, and it features an alarm that activates when the pressure drops between 4 and 6 MPa.
**(B) Bao Bao Single-Bottle Air Respirator**
1. **Structure**: Similar to the standard model, the Bao Bao single-bottle respirator includes a back support, gas cylinder, gas valve, pressure relief valve, face mask, pressure gauge, shoulder straps, and waist belt.
2. **Performance**: This version is slightly heavier, weighing 11.8 kg, and has a larger cylinder capacity of 9 liters. It also operates at 30 MPa, storing 2,460 liters of air, which allows for about 90 minutes of use. The alarm system triggers when the pressure falls between 4 and 6 MPa.
**(C) Double-Bottle Air Respirator**
1. **Structure**: The double-bottle model includes the same essential components as the single-bottle versions, such as the back support, two gas cylinders, gas valves, pressure relief valves, face mask, pressure gauge, shoulder straps, and waist belt.
2. **Performance**: With two 6.8-liter cylinders, this model weighs 18 kg and provides a total gas storage of 2,720 liters. It offers up to 136 minutes of use, with an air supply rate of 300 liters per minute. The alarm activates when the pressure reaches 4–6 MPa.
**Usage**: This type of respirator is primarily used in fire scenarios where toxic gases and smoke are present, ensuring that firefighters and emergency responders can breathe safely.
**How to Use**:
1. Check that all components are intact and functional, and ensure the cylinder pressure is not below 25 MPa.
2. Adjust the shoulder straps and waist belt for a secure and comfortable fit.
3. Connect the air supply valve to the mask and turn it clockwise until you hear a click, indicating it is properly attached.
4. Fully open the gas valve while monitoring the pressure gauge to ensure sufficient airflow.
**Notes**:
1. Make sure there are no facial hairs or beards that could interfere with the mask’s seal.
2. Always check that the cylinder pressure is above 25 MPa before use.
3. When the pressure drops to 4–6 MPa, the alarm will sound immediately, signaling that the air supply is low.
4. Store the respirator in a room with a temperature of 5–30°C and humidity between 40% and 80%. Avoid areas with corrosive gases. If the full-face mask is not in use for a long time, store it in its natural state, and apply talcum powder to rubber parts to prolong their lifespan.
---
This version enhances clarity, improves flow, and adds practical details to make the content more informative and realistic.
A machine made sink, also called as a drawn sink, is forged of 1mm or 0.8mm thick stainless steel sheet. By using the metal forming technology, it can produce the versatile kitchen sink with large radius corners.Â