Roadside stone construction roadside stone maintenance

Roadside stones can be seen everywhere on the street. Everyone should pay attention. The so-called curbstone refers to the boundary stone that is used on the edge of the road. It is also a road or border stone. It is the boundary between roadways, sidewalks, green spaces, isolation belts and other parts of the road. It serves to protect pedestrians and vehicle traffic. Safety and ensure the neatness of the edge of the road. Next Xiaobian introduced roadside stone construction and pavement stone conservation.

Roadside stone construction

1. The road next to the stone is necessary to hang through the line for construction. Press the top of the side plane to show the height of the marking line. Press the line code to build the side of the flat stone. The side of the flat stone should be upright. Avoid forward leaning and closing. The top side of the road is smooth and smooth. Concavity and convexity of the wrong teeth, the plane without the wrong table, the wrong side of the table phenomenon.

2. The stone next to the road is necessary to build a mortar and masonry;

3. The misalignment of the stone joints alongside the road is not more than 1mm; the side rock and stone must be evenly staggered in the middle.

4. The side stone on the side of the road should ensure that the scale and the finish are satisfactory. The appearance is beautiful. The curve stone should be specially processed for the side rock of the curve section. When the masonry is built, the linear flow, roundness and tight seams should be ensured. Curved side stones need to be hand polished and polished.

5. The back of the stone next to the road should also be soil compaction. The tamping width should not be less than 50mm and the thickness should not be less than 15mm.

6, the road next to the stone hooking: hooking when necessary to re-hook the line, the debris inside the side of the stone to remove the clean, wet with water, and then fill with 1:2.5 cement mortar filling dry.

7, stone hooking along the road, after the installation of an appropriate watering maintenance.

Roadside stone conservation

1, Lu Yanshi should be dry and crack-proof

Although the stone environment can not be in a place that is always damp and dark, but it can not be in a particularly dry place, to maintain a certain humidity, but not damp, if the stone has been in a dry environment, it will put the water inside the stone Absorbed, the surface of the stone will crack.

2, stone to prevent heat

If the stone is often exposed to intense luminosity, as the temperature increases, the gloss of the stone will mutate.

3, stone along the way to prevent acid and alkali

The chemical composition of stone is basically neutral. When installing, it should be noted that it is best not to install it where there is too much chemical composition. Stone is afraid of acid and alkali. Contact with many substances containing acid and alkali will cause the stone to find corrosion. When curing, curing agent products can not be used casually, many products will contain acid and alkali components, but also a threat to the stone.

Editor's summary: The roadside stone construction and roadside stone conservation are introduced here, and we hope to help everyone. If you want to know more related information, you can pay attention to this website information.

Pass the door stone Feng Shui jade stone translucent stone construction installation construction

Cross is one kind of pipe fittings.Also called pipe spool or four-way pipe fittings, connectors, to branch pipe used in the main line.Made of carbon steel, stainless steel, alloy steel and other special metal materials as required by its customers.

 Cross have two kinds, straight cross and reducing cross , such as diameter of cross over end are all the same size;Reducing the cross, the director of the control of the same size and branch pipe to take over the size less than to take over the size of head.Cross is used for a pipe fittings pipe branch.