Old wooden door refurbished eight steps to paint on the brighter

The wooden door has been used for a long time, and the surface begins to turn black and rough. It takes a lot of money to buy a new door, so how do you renovate the wooden door? The easiest way is to paint again. And if you paint yourself to achieve the effect you want, how do you paint the wooden door at home?

The first step is to unload the handles and other decorations.

Remove the handles and other decorations on the wooden door to prevent the hand from scratching the next step, and it is also conducive to uniform paint.

The second step is to polish.

1. Grind the place where you need to paint with coarse sandpaper. Pay attention to the corners and do not polish them too much, and keep the original shape of the wooden door.

2. Dip the cloth with water to make it semi-wet, and wipe the powder on the newly polished wooden door.

3, take the fine sandpaper and re-polished again, pay attention to the corners.

4. Clean the powder with a cloth dampened with water.

This part is very important, so that the wooden door is painted more firmly.

The third step is to paint.

1. Take paint, brush, and paint cover.

2. Dip the brush in the paint bucket and do not touch too much paint at a time.

3, the rule of painting is from top to bottom, from left to right.

4, pay attention to the corners and hidden areas should also be painted.

The fourth step is to dry.

Leave the painted wooden door for four to five hours and wait until the paint is dry.

The fifth step, then polish.

After the paint has dried out, use a fine sandpaper to polish the wooden door from start to finish.

This time, the sanding is to smooth the unevenness of the brush on the paint, which is good for continuing the painting.

The sixth step, paint the second time.

Follow the third step above to paint the second time.

Note that if the paint is too strong, add a proper amount of rubber water, dilute the paint and brush.

Then continue to dry and polish.

The seventh step is to paint the third time.

Brush the paint again as described above, so that the paint on the wooden door is finished.

In the eighth step, attach a handle and other decorations.

Install the ornament that was removed from the first step, such as the handle.

Then the entire wooden door is finished.

At this time, you will find that the paint on the wooden door is even and beautiful, and the whole room is beautiful.  

Hexagonal boxes are made of heavy galvanized wire / ZnAl (Galfan) coated wire / PVC or PE coated wires, the mesh shape is hexagonal, with the quality of high corrosion resistantance, high tensile strength. The gabion boxes are used widely in slope protection, foundation pit supporting, mountain rock holding, river and dams scour protection.

1.Material:Galvanized wire, Galfan Coated wire, PVC coated Galvanized Steel wire. 

2. Weaving types:

normal twist, reverse twist, double twist.

3.Packaging:compressed and packed with pallets.

4. Feature:

Firm structure, Flat surface, Great corrosion resistant, Oxidation resistant, Durable, High intensity.

We follow the major international standard in our manufacturing process.

ASTM 975 Standards:

 Style 1  Galvanized wire as per ASTM A 641, class 3 soft temper

 Style 2  Same as style 1 with extra coating with PVC.

 Style 3  Zn-5Al or Zn-10Al coated wire as per ASTM A 856, also known as Galfan wire.

EN 10223-3 Standard:

 Galvanized wire meets EN 10244-2 and old BS 443

 Wire tensile strength is between 380N/mm2 and 550N/mm2 as per BS 1052.

Our Tolerance Standard:

On the hexagonal double-twisted wire mesh, size of opening should not exceed +/-5% on the nominal dimension

Hexagonal Mesh Gabion Regular Sizes