Bearing application focus and cooperation

Home>Bearing knowledge> Bearing application matters and cooperation
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Bearing application focus and cooperation

Source: China Bearing Network Time: 2014-05-09

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The use of matters needing attention to roll the bearing to make fine parts; therefore, the demand in the application is correspondingly stable; the use of high-performance bearings; if not used properly; can not reach the expected function; therefore; the use of bearings should focus on the following matters :
Adhere to the hygiene of the bearing and its surroundings. Even the shallow dust that is invisible to the naked eye enters the bearing; it will also add bearing wear; oscillation and noise.
Be careful when using the device; do not allow strong punching; do not directly hit the bearing with a hammer; do not allow pressure to pass through the roll.
Use appropriate and precise means of installation; use special things as much as possible; try to avoid using cloth and short fibers.
Avoid the corrosion of the bearing; when taking the bearing directly by hand; wash the sweat on the hand thoroughly; and apply it with high-quality mineral oil; then pay special attention to rust in the dry season and summer.
The cooperation between the bearing and the selection of the inner diameter and outer diameter of the rolling bearing is made according to the norm; the inner ring of the bearing and the shaft; the cooperation between the outer ring and the seat hole can only be achieved through the public and seat holes of the steering journal. The civil service is completed. The cooperation between the inner ring and the shaft of the bearing is made by the base hole; the cooperation between the outer ring of the bearing and the seat hole is made by the shaft.
Correct selection of cooperation; it is necessary to know the bearing load conditions of the bearing; working temperature and other needs; and in practice it is very difficult. Therefore, most of the situation is based on the use of fine research to select cooperation.
The over-winning between the load ferrule and the shaft or the outer casing depends on the load. Now the mother-in-law is smashing the tomb and calling the mother-in-law.

Recommend to friends comments close window

Bearing related knowledge
Teach you how to install a thrust (positioning) bearing?
High-skilled bearings add drive bearing steel advancement
NSK bearing removal method
SKF imported bearing selection method linear bearing characteristics and use


This article links to http://
Please indicate the bearing network http://

Previous:Transportation and storage of reverse support Next:How can KOYO bearings use their talents to maximize their life?

ISO standard reinforced GCL is a kind of special used for artificial lake water, landfill, underground garage, the roof garden, pool, oil and chemical storage area such as seepage prevention of geosynthetic materials, it is made of high dilatability of sodium base bentonite filling between the special composite Geotextile and non-woven fabric, with acupuncture law into bentonite seepage control pad can form many small fiber space, is bentonite particles can not be like a direction, when under the influence of water within the mat forming uniform density of colloidal membrane, prevent the leakage of water.

GCL PET (1)

Usage:
It is used to prevent water leakages in areas of artificial lakes, waste disposal fields, underground garage, top building gardens, reservoirs, oil warehouses, and chemicals accumulating fields.
GCL with film

Features:
1. Improved leakage performance
2. Permanent waterproof performance
3. Simple construction and short time limit for a project.
4. Not influenced by air temperature.
5. A kind of green material and good to environmental protection.
6. More versatile than compacted clay 
7. Increased airspace and liner efficiency 
Ce Iso Of Gcl

Powder Waterproof Blanket

Powder Waterproof Blanket,Gcl Water-Proof Blanket,Waterproofing Waterproof Blanket,Api Waterproof Blanket

Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com