Five notes on wooden floors

The floor is the floor decoration material that is formed after the wood is dried and processed. The quality of the floor sometimes affects the quality of the entire home improvement. Therefore, everyone must identify the merits of the floor when buying the floor. In addition, attention must be paid to the construction method. Otherwise, there may be many solid wood floors that are deformed, blackened, etc., resulting in unnecessary Economic loss. Here are a few notes.

1. According to the requirements of the design style to determine the wood species of the selected solid wood flooring, such as the depth and depth of the color, the sparse and dense wood; then based on their own economic ability, positioning on the price. After confirming the above requirements, it is necessary to carefully inspect whether the square standard of the wooden floor and the notch of the slot joint are standard, and slide the two solid wood floor slots together to check whether the sliding is smooth and whether the joint between the board and the plate is smooth.

2. When choosing solid wood flooring, it cannot be judged by color difference. Solid wood flooring is a natural material. The wood on the same tree also has a color difference between its sunny side and its shady side. Chromatic aberration is an inevitable factor of natural materials, it does not affect the quality of the floor, it does not necessarily affect the appearance; do not choose the length and width of solid wood flooring, the advantages and disadvantages. The long board has high requirements for material selection and large loss, so the price is high. In the construction process, it is not very easy to deform. The small plate material has high utilization rate, low price, and is not easily deformed and is economically applicable.

3. The treading feel of the wooden floor is good, coupled with the warm atmosphere that can be laid in the space, so it is one of the preferred building materials for many people in the renovation. Although most of the supervision of the supervision of the work of the designer is responsible for the designer, but there are several points we must know the acceptance of the focus. For solid wood flooring, there is an acceptance point that requires special attention, that is, the water absorption rate of the material must be confirmed during construction. Since the natural material will change due to the humidity, it is necessary to confirm whether the reserved space is compatible with the future expansion. Shrink the size of the space, so as to avoid deformation after laying.

4. Attention should be paid to the construction method of the floor type floor, especially when the construction is carried out, so as not to affect the tightness of the combination. After the construction of the floor, it is also necessary to pay attention to whether the edge of the wood layer is separated from the splint, and if so, the worker is required to redo the work to ensure the construction quality.

5. When testing solid wood flooring, visual defects such as dead knots, insect eyes, oil eyes, tree cores, etc. are visually observed, and the surface is smooth and smooth without warping deformation. Uniform, complete and regular processing of the mouth ridges is acceptable. No burrs or damages are qualified products. . Among them, it is necessary to particularly detect the moisture content of wood, and floors with high moisture content are easily deformed after installation.