KSNFJ is a factory ready-mix powder that has undergone strict quality control to facilitate on-site construction. It contains a selection of metallic mineral aggregate materials and specialty Portland cement, as well as special additives to promote construction performance. Specially made materials ensure gradation and free from impurities, which aggregate shows good conductivity and wear resistance.
KSNFJ for the need to improve the wear resistance, resistance of the concrete surface, in particular, sparks, antistatic areas. For example: flammable warehouse, chemical plants, petrochemical plants, dangerous products workshop, gas stations, liquefied gas stations, hangars, textiles, electronics, paper, printing and other long-term electrostatic regions.
1. To make the ground extremely hard, wear and impact resistance
2. With the concrete surface to form a monolithic bond
3. Fireworks conductive static
4. Anti-all kinds of oil, grease erosion
5. Easy to construct
Wear resistance: The KSNFJ-treated concrete floor exhibits at least three times more wear resistance than the untreated concrete floor.
Electrical properties: KSNFJ shows good electrical conductivity to dissipate static electricity. KSNFJ can be grounded in the traditional way with specific requirements. Due to the ductility of metallic materials in the ground so that the impact of metal collision with a high degree of fireworks.
Surface resistance: 1.0×105 ~1.0×108Ω
Compressive strength: Using the same amount of water as the actual construction, KSNFJ test block 28 days standard compressive strength of 90Mpa.
Storage: KSNFJ and Curing Agent intact packaging stored at room temperature and dry environment, the storage period of six months.
Health and Safety: The cement powder contained in KSNFJ will adversely affect the skin during normal use. When the product is mixed with dampness, the released alkali will damage the skin, irritate the eyes and respiratory system, avoid inhalation of its powder, and avoid skin and eye contact. Wear suitable gloves and eye protection. Once touched the skin, wash with water. Once you reach your eyes, immediately wash with plenty of water and seek medical treatment.
≤3.1
Project
Performance
Compressive strength (3 days)
≥40Mpa
Compressive strength (28 days)
≥90Mpa
Bending strength (28 days)
≥13.5Mpa
Non burning, do not explode, not flammable
Fire class
A1 level
Wear resistance(750g/500r)
≤0.03g/ãŽ2
Hardness (Mohs)
≥7
Surface strength (indentation diameter mm)
Oil resistance oil seepage
＜0.3mm
High temperature
+200℃
Freezing type
-40 ℃ (Freeze-thaw 25 times after the
specimen without cracks, corner off defects,
the rate of strength loss
Bond strength(28days)
≥2.0Mpa
Skid resistance
(wet and dry friction coefficient)
≥0.5
Air cleanliness
N7 ~ N9 level
Green No harmful radioactive, no harmful volatiles, no pollution
Non-Flammable Ground Hardener,Non-Flammable Carborundum Floor,Anti-Static Carborundum Floor Jiangmen Kasole Building Materials Co., LTD. , https://www.kasole-paint.com
China's national economy will continue to maintain a relatively fast development speed during the "Eleventh Five-Year Plan" period, providing reliable macro support for the development of the mold industry. Although China's mold industry started late, the low-end products were mainly in the early stage, but with the gradual transformation, new opportunities for the industry have already been placed in front of us.
In recent years, China has imported nearly one billion US dollars of mold per year, of which precision, large, complex, long-life molds account for the majority, so from the perspective of reducing imports, the proportion of such high-end molds and hardware tools in the market will gradually increase. . In the future, China's mold and CNC tool industry will also rank among the best in the world.
With the continuous development of China's mold industry, the demand and requirements for mold products are gradually improving. And this improvement brings more power to the industry's technology. In the future development of the industry, technological innovation is naturally the main, and technological upgrading is necessary, which is the most important condition for the rapid development of the industry and market demand.
At present, the domestic market has a large demand for medium and high-grade molds, among which the home appliance, automobile and plastic products industries have the largest demand for molds. It is understood that during the "Twelfth Five-Year Plan" period, the overall trend of the mold market is stable and upward, but domestic molds must meet the needs of users in terms of quality and delivery time.
In the international market, in recent years, labor costs in industrialized countries have increased, and they are moving to developing countries, especially Southeast Asian countries. Its domestic production of high-quality, precision molds, the amount of labor input is large, relying on imports to solve. Therefore, the potential of the medium and low-end molds in the international market is enormous. As long as the quality of domestic molds can be improved, the delivery time can be guaranteed, and the prospect of mold export is very optimistic. In addition, the demand for standard parts of national molds is also large. At present, there are only a small number of exports in China.
In the past year, the slow growth of demand in China's tool market was mainly due to the increase in tool life, and the need for users to address the entire manufacturing process, replacing many machine tools and tools, and the use of multi-tools. It replaces many simple tools with previous single functions.
From the perspective of the technological development trend of the machinery manufacturing industry, the proportion of high-efficiency CNC machine tools in China's factories will increase year by year, and the demand for high-efficiency advanced tools will increase rapidly. In addition, due to the increase in labor costs in China, the price advantage of medium and low-end tools will gradually be lost. For the current situation that the demand for advanced tools of CNC machine tools is increasing, China's tool industry must change its concept, vigorously develop the production of high-efficiency and advanced tools, pay attention to sales, pay more attention to after-sales service, and strive to innovate to occupy more market share.
The plastic hardware industry is a traditional industry in China. It started earlier and developed more maturely. At the same time, it has also grown a group of SMEs with potential. Under the current international competition environment, the original advantages can no longer meet the requirements of modern trade processes. Compressing costs and the need to maximize profits, accelerating the development of e-commerce has become an inevitable choice for the domestic plastics hardware industry to meet the challenges of economic globalization, grasp the initiative of development, and enhance international competitiveness. In the 21st century, e-commerce will become a hardware plastic. The main driving force for trade growth in the mechanical mold industry.
China's current mechanical plastics and metal mold market is very active, plastic hardware products will become a new consumer hotspot and a new economic growth point, but the cruel market situation and the competitive situation have pushed related enterprises in the hardware and plastics industry chain to the edge of the cliff. Faced with the pressure of the international market, domestic hardware and plastics enterprises must overcome the unfavorable factors such as high raw material prices, increasingly fierce market competition, and severe overcapacity of some products. They should actively change their business models and use modern networks to highlight the functions of the intangible market. To achieve tangible market and intangible market simultaneously, broaden sales channels, tap the potential of enterprises, and actively explore the international market, in order to let enterprises really come out of the predicament.
Basic material characteristics