Why must solid wood furniture paint?

Solid wood furniture is of course painted.
It is best to use varnish so that the texture of the wood can be clearly displayed. Moreover, the varnish generally has a protective function of reducing ultraviolet radiation, and as long as the varnish layer is intact, it can effectively delay the aging of the paint. This not only has a protective effect on solid wood, but also has a beautiful appearance.

In the south, due to the relatively humid climate, many surfaces of furniture are basically covered with a thin layer of lacquer to prevent moisture. The paint on solid wood furniture is water-based paint, does not contain formaldehyde, and it smells like solid wood. Will not affect the log, but it is still environmentally friendly. If it is not painted, the furniture will turn black and the paint will have a protective layer.

The paint should still be brushed, or else it may look new, but as long as it takes a little longer time, the board will be dirty, and then it will be very difficult to wipe it off. Although the paint will have some flavor, it will disappear in a few days - there is a little residual "toxin" and it will not cause harm to people. Moreover, this residual toxin will decrease every day.

In fact, as long as the thinning brush with a sealing primer on the line on the line, the first time after brushing with a sand, then brush it again will become smooth, so that already has anti-pollution (plate surface) Functional.

Say so much, sum up is the following points:

Solid wood furniture has a higher hardness, so it is easy to polish a smooth and warm touch. If exposed directly, it can easily be scratched or worn, losing the texture of jade, and painting is the equivalent of wearing a layer of armor on the furniture.

"Beautiful wood is beautiful, moist and gentle, just see the texture."

The moisture content has a great influence on the stability of the wood. The paint is used to seal the surface of the wood and the internal and external communication of the wood is performed slowly and gently to ensure that the wood is not deformed. It can prevent the external moisture from penetrating into the wood quickly, and it can also prevent the internal water from evaporating excessively and ensure the stability of the wood moisture.

After painting, the wood is not in direct contact with the air and will always retain its fresh wood color. If logs are directly exposed to air, they are easily corroded and oxidized.

Wood ducts are often the site of filth. No matter how delicate it is, it is impossible to seal the ducts of the wood. After painting, the ducts are sealed and filled. To clean, gently wipe with a rag. You can clean it up.