What are the methods for ground tile mosaic? What should pay attention to the floor tile mosaic?

Nowadays, many families choose ceramic tiles when they are decorating the ground, so the ground looks more fashionable and more beautiful. If you choose a mosaic tile to decorate the ground, you must pay attention to the decoration methods and techniques, and choose the right pattern. So what are the methods of floor tile mosaic? What should you pay attention to on the floor tile mosaic? Let's take a closer look.

Ground tile mosaic method

1. Before we look at the practice of how to embed the floor tiles, we must first understand the practice of conventional floor tiles. When laying the floor tiles, we need to make the seams. The size of the seams should be determined from the visual aesthetic point of view. When processing, all kinds of dirt on the wall should be cleaned and watered one day in advance. Before the floor tiles are pasted, they must be soaked in clear water for more than two hours. Take the bricks without bubbles, take them out and dry them for use.

2. Find the standard point. When laying the pavement, control the flatness of the surface. If it seems to be uneven, re-lay it. When it is stuck, encounter the pipeline, the switch of the lamp, the support of the bathroom equipment, etc. Set the cut and match, it is forbidden to use the non-whole brick to piece together.

3. When paving the floor tiles, the paving method is almost the same as the paving method of the conventional floor tiles. Just notice that when laying the paving. Pay attention to the protection of parquet tiles. Since the current mosaic is mostly waterjet cutting, the cost and the cost of bricks are relatively large, so carefulness is the most important. At the same time, it should be noted that the seams should be even and can not be misplaced. Finally, the bottom plate is fixed. Whole board paving.

What should pay attention to the floor tile mosaic?

1, the seam is laid, in theory, all bricks should be left seam, just determine the size of the seam from the visual aesthetics

2. When the base layer is treated, all kinds of dirt on the wall surface should be cleaned and watered and moistened one day in advance. If the base layer is a new wall, when the cement mortar is 70% dry, it should be arranged for brick, bullet and paste.

3. The standard point must be pasted before the official paste to control the flatness of the pasted surface. The flatness should be checked by the ruler at any time during operation. If it is uneven or not straight, it should be removed.

4. Before the tile is pasted, it must be soaked in clear water for more than two hours. Take the brick body without bubbles, take it out and dry it for use. Paste from the bottom to the top when pasting, requires the mortar to be full, when the ash is lost, it must be removed from the sticky, and it is not allowed to fill the ash from the brick joint or the mouth.

There are a lot of colors on the ground tile mosaic. When decorating, you must pay attention to the specific decoration methods and techniques. You should choose the pattern according to the interior decoration style. The above is a small series on the method of floor tile mosaic and the introduction of the floor tile mosaic, we must polish your eyes when you buy.