How to prevent the bathroom from rubbing against bricks

Recently it has been rumored that a method for waterproofing bathroom-free tiles is to dip the waterproof material into the bathroom, and waterproofing can be done without removing the tiles. How does the waterproofing of the toilet-free tiles proceed? How effective is this? Well, let's learn about it with Xiaobian.

First, the bathroom is free of bricks waterproof method

1, water cut off water

First of all, we must find the place where the water seepage occurs, and make the water pipe buried under the tile a bright pipe, so that even if the water pipe breaks, the water source will not leak when the water source is cut off.

2, net cement waterproof

Clean the gaps between the tiles, especially the cement joints that the bathroom can see. Be sure to clean the cement joints. Then use the clean cement and clean water to mix thoroughly. Use the brush to pick up the clean cement and evenly brush into the clean cracks. Apply a few times, this will also have a waterproof effect.

3, professional plugging product waterproof

Similar to the second waterproof method, the gap between the sanitary tile and the ceramic tile is cleaned firstly, and the cement joint of the toilet is also cleaned. According to the relevant description of the product, the brush is applied in the gap, and the speed is faster. Brush a few more times.

Second, the free-tile brick waterproof material effect

1. How to prevent the water leakage and water leakage of the bathroom from the method of waterproofing the bricks? Next, let's find out more specifically. Not to mention the issue of environmental protection first, it does not say that the free-tile brick waterproof material flows into the mortar layer through the gaps in the tiles, and the saturation of the bathroom itself that has leaked water is already high. The continued use of mortar cannot fully enter the water seepage layer, even if it enters a small amount. Mortar, this waterproof effect is also relatively low.

2, the use of toilets to avoid rubbing bricks waterproof method, the first thing to know is to find out the location of the leak and the reason, so that there is a way to solve the use of rubbing bricks. The maintenance plan of the free-standing bricks must also be designed according to the different environments of the bathroom, and the construction materials with different properties should be used to achieve long-term waterproofing of the bathroom.

Summary: The way in which the bathroom is free from flooding bricks does not solve the problem of water seepage in all bathrooms. Instead, it has to design a reasonable solution according to the situation of seepage. For more information on the method of waterproofing bathroom-free tiles and the effect of free-standing tiles, please refer to the following.