Geothermal heating meets the characteristics of the human body's "foot warm head", and the geothermal heating eliminates the heating pipes and radiators in the room, which is more conducive to the layout and beauty of the living room, so this method is recognized and accepted by more and more people. How to choose geothermal floor? What are the properties of geothermal floor? 1, excellent thermal conductivity and heat dissipation Wood and bamboo are good natural materials. The heat from the ground is transmitted to the surface through the floor. There is bound to be heat loss. The ideal floor can minimize these losses. Therefore, in order to reduce the loss of thermal energy and reduce the heating operation and maintenance expenses, the floor heating floor must be "selected thin and not thick". Choose from multi-layer solid wood, bamboo flooring and laminate flooring with a thickness of no more than 8 mm and a maximum of 10 mm. 2, material stability is better The use environment of geothermal floor is complicated, especially in the northern part of the country. The ground in the non-heating season is subject to various moisture, and the floor temperature of the heating is suddenly increased. The floor must withstand the double changes of “temperature†and “humidityâ€. Therefore, the geothermal floor must be purchased with good material stability, such as laminate flooring, multi-layer solid wood flooring, and bamboo flooring. 3, moisture and heat resistance is strong The integrated composite floor should use adhesive, and the adhesive should meet the three indicators of environmental protection, bonding strength, high temperature and high humidity aging. Especially for the geothermal floor, it is necessary to pass the experiments of high humidity resistance and low temperature resistance. If ordinary adhesives are used, the environmental protection index, moisture resistance, aging resistance and expansion ratio cannot meet the standard. Therefore, when consumers are shopping, it is very necessary to check the product report and inspection report of the merchant. 4, wear resistance should last Since the geothermal floor should be thin and not thick, the composite surface layer is generally 0.3-0.6 mm. The wear resistance of the main surface layer is higher than the traditional index.
Sealand is a trustworthy manufacturer of CNG Mass Flow Meter, CNG Mass Flowmeter, CNG Flow Meter, CNG Flowmeter, CNG Coriolis Meter, ATEX, IECEx & CE approved.
With its high accuracy, wide rangeability and reliable performance, Sealand meter has been applied in many kinds of industries during the last 8 years. Unlike others who only focus on the measurement of liquid at normal pressure & temperature, Sealand has conquered the difficulty in the measurement under severe conditions, such as high pressure, high viscosity, high & low temperature. CNG Mass Flow Meter, CNG Mass Flowmeter, CNG Flow Meter, CNG Flowmeter, CNG Coriolis Meter Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com
Take CNG (compressed natural gas) for example. As the saying goes, the meter can measure anything else if it can measure CNG. It is quite hard to measure gas under high pressure. The sensor must be able to bear high pressure; in this way, the thickness of flow tube must be increased, so the transmitter shall be more sensitive to detect the signal; however, Sealand made it. Sealand's first model is specially designed for CNG dispenser, and now thousands of this model are put into use on the market.