For you to decorate the regret expert expert strokes home decoration also has "repent medicine"

Expert support home improvement "regret medicine"

Those who have experienced renovations know that the decoration of any family will leave more or less regret, no matter how well planned it was. In the face of regret, the decoration masters have given many tips or remedies, so that the hard work of the renovation process finally become a pleasure to enjoy.

Regret location: bedroom

I'm sorry that the power supply is unreason

(Users eggs) The bedroom did not accurately measure the wiring, but roughly visually, to determine the location of the power outlet. As a result, when the computer desk was bought and returned home, it was discovered that the position of the table leg was just blocking the position of the power outlet. There was no way to replace it with a socket, and the line went out.

Tip: Prior to arranging the location of the bedroom power outlet, the size of the furniture to be placed should be provided to the electrician as accurately as possible. In addition, under the premise of not affecting the appearance, as many as possible to reserve a few outlets, sooner or later in the future to use.

Unfortunately, the top light did not make a double control

(Users big head treasure) Six months after the renovation was heard, the ceiling light can be double-controlled, a switch beside the door, a switch beside the bed, so to save the winter lying in bed and turn off the lights.

Unfortunately remedy: During the renovation process, communicate with friends and worker masters to find a fitting solution suitable for your home. If you can not do double control lights, you can install the controller on the ceiling light, turn the top light into a remote control, can also achieve dual control effect.

Sorry place: living room

Unfortunately, there is no leftover door size

(Reader Ms. Liu) When installing the two doors into the living room, only the thickness of the floor was taken into account, and the thickness of the floor mat was not considered. As a result, there was almost no excess after the floor was finished. Originally wanted to put a beautiful floor mat at the entrance, it now seems impossible to achieve.

Tip: When installing the door, be sure to fully consider the thickness of the floor, floor tiles, floor mats, etc., leaving more than in advance.

Regret: Wall wall is not reserved for wall outlet

(User Lone Ranger) When decorating the TV background wall, patronized the overall effect and neglected its practical functions. As a result, he forgot to reserve the wall outlet's power outlet. No way, LCD TVs can only be placed on TV cabinets, and they feel depressing. If you hang up, you have to take the open line. It's ugly.

Tip: If the owner uses an LCD TV at home, he must remember to leave a wall outlet on the wall.

Sorry place: kitchen

Unfortunately, the smoke is hard to dismantle

(Netizen's sunrise on the east side) There are a lot of pipes on the corner of the kitchen, and when it is decorated, it is covered with cement boards, and the exhaust pipe of the hood is put in, and tiles are attached outside. Results During use, the hood was found to be poorly vented and it was very difficult to replace the exhaust duct.

Tip: The flue or fixed pipe should not be sealed during the decoration. You can wrap it with a board and then scrape white or brush oil on the outside and leave the access hole for future maintenance.

Unfortunately the kitchen did not make shelves

(Mr. Niu, the reader) The kitchen area is not large, and there are no racks along the walls. It does not make good use of the corner space of the kitchen. The cruet bottles needed for cooking are not enough for storage, and there are some knives, shovels, spoons, etc. There was no place for the tools. They had to be stacked in a cupboard and it was extremely inconvenient to use.

Unfortunately remedy: The kitchen is a place for cooking, so it must be based on practicality. If the kitchen area is not large, some shelves or brackets should be properly placed on the wall according to structural features to facilitate the placement and hanging of essential items.

Bay window decoration entrance decoration decoration TV decoration switch living room background living room TV decoration living room cabinet door rack home cabinet kitchen cabinet door floor tile door mat bedroom TV background wall tile backdrop wall background wall tile kitchen tile small bedroom floor tile bedroom lamp

Heat Shrinkable Tape


I System description:

Heat Shrinkable Tape is designed to protect the weld joint of buried or exposed steel pipelines and insulated pipeline. This sleeves are manufactured from high quality cross linked polyethylene material. Hot melt adhesive provides excellent adhesion with the surface of steel pipeline, PE coating. Meanwhile it forms a continuous and firm anti-corrosive system with the surface of the pipeline.

The Polyethylene Heat shrinkable Tape needs no primer nor patch closure and reduces application time and labour costs.

â…¡ Structure

The specification of the tape consists of three layers,

Adhesive: butyl rubber based hot melt adhesive

Film backing: Radiation crosslinked polyethylene

Interleaf:Antiadhesive Film Treated with Silicone


â…¢ Features

After heating, formed corrosion protection seal

Strong backing provides outstanding waterproofing effect

High chemical resistance. resists impact, abrasion and ultraviolet light.

Excellent resistance against cathodic disbondment, dielectric breakdown.

Simple Application


â…£ Physical Properties

· Product Data Sheet Total Thickness:40mil, 50 mil,60 mil ,65 mils.

· Width:50,100,150,300,400,500,800 mm

· Length: 10 m

· Tensile Strength:35 N/cm

· Elongation:400%

· Adhesion Strength to pipe:30 N/cm

· Application temperature: -10 -60 ℃

· Temperature resistance:-50 ℃ - 80℃

· Shelf Life: 12 months


â…¤ Application

No Special skills, equipments, patch closure nor primer are needed. Its superior flexibility provides easy and reliable application for irregular configurations of fittings, bends and elbows and small diameter of straight pipes

Wrap spirally the tape over foreign matters-free and preheated surface, beginning at least 25~50mm (1~2 ) onto pipe coating. Wrap the tape with enough tension to obtain conformability and with minimum 50% of overlapping, while removing the release liner. Warm the end part of the tape and press down firmly. Using a torch, start at the edge of the tape and heat circumferentially around the coated pipe.

Finish off by heating over the entire tape vertically to ensure a uniform adhesion and by using a roller or gloved hands to remove wrinkle and air.

VI. Technical Datas

hot1

hot2


Heat Shrinking Tape

Hot Shrink Adhesive Tape, Heat Shrinkable Electrical Tape, Heat Shrinkable Wrap Tape, Shrinking Tape, Heat Applied Tape Coating System

Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com