Acceptance method for construction of kitchen tiles

In the home improvement acceptance process, the acceptance of the kitchen is a step that must be taken seriously. So, how to accept the construction of kitchen tiles? Acceptance of the construction of kitchen tiles to pay attention to what issues? Next, I will talk to you about the acceptance methods for the construction of kitchen tiles.

Acceptance methods for construction of kitchen tiles:

1, check the kitchen wall, floor tiles have no obvious color;

2. Check the flatness of the wall and floor tiles;

3. Check if the angle of the yin and yang on the wall is square and straight;

4. Tap with a small hammer to check the emptying rate of walls and floor tiles;

5. In principle, the emptying rate of walls and floor tiles cannot exceed 5%;

6, found that emptying rate is too high must require the construction side compensation and rework;

7. Pay attention to whether the opening position of the circuit board wall panel is reasonable;

8. Pay attention to whether the openings of the circuit bricks are square;

9. The opening of the circuit board panel above the cabinet wall is preferably on the same horizontal line;

10. Check whether there are cracks, bruises and missing corners in the wall tiles;

11, pay attention to whether the wall, tile joints are uniform, straight;

12. Finally, check whether the wall, floor tiles and kitchen door frames have been bumped or damaged.

Masonry Project Acceptance Construction Acceptance Tile Paving Home Improvement Kitchen Doors Doors Household Cabinets Kitchen Wall Tiles Cupboard Doors Kitchen Doors