BBQ grate,stainless wire grill grate,grill grate,stainless steel bbq grate, iron bbq grate, etc. Suitable for indoor and outdoor barbecue, group activities, increase the fun of life.Multi-functional Grill Cooking Grid Grate: This wire mesh is mainly used for BBQ Grill Mat for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it. stainless wire grill grate,stainless steel bbq grate,iron bbq grate,bbq grill grate,bbq grill grates custom Shenzhen Lanejoy Technology Co.,LTD , https://www.szstainlesssteelwiremesh.com.jpg)
Exhibitors: Zhengzhou Zhongnan Jiete Superhard Materials Co., Ltd. .jpg)
Exhibitors: Henan Fenike Superhard Materials Co., Ltd. .jpg)
Exhibitors: Henan Yuxing Huajing Micro-Drill Co., Ltd. JIMTOF2012 has 10 exhibition halls with more than 800 booths, nearly 70 booths with super-hard materials exhibits, more than 30 booths for grinding wheels and abrasives, superhard materials. The exhibitors of abrasives and abrasives are basically from Japan, and there are fewer overseas exhibitors in Europe and the United States. Only three companies producing diamond and cubic boron nitride abrasives are exhibiting in China (excluding Zhengzhou Diamond Precision Manufacturing Co., Ltd., which is exhibited in the name of Japanese agents). Limited). Although the exhibition was influenced by political factors, it still did not lose the grace of the international exhibition. During the exhibition period, the flow of people was woven and the exchanges were active. On the afternoon of November 1, 2012, the Superhard Materials Branch held a symposium with the Japan Industrial Diamond Association. Japanese participants include: President Kazuo Kazuo, Vice President Xiaoliu Xiicou and Zao Qianqian, Director Yoshii Yuichi, Secretary General Wu Tenglong; Chinese participants include: Secretary General Li Zhihong, Director Chen Jifeng and Zhang Hongtao, Fan of China National Automobile Corporation Xiaoyu. Chuanxiong and Li Zhihong introduced their respective members' composition, the main duties of the association, and the basic situation of the diamond industry and market in the two countries. President Chuanxiong said that there are 51 industrial diamond members in Japan, one president unit, two vice president units, 18 directors, and 80% coverage. Each year, five volumes of technology, standards, statistics, etc. are published and published three times a year. Council, a general meeting of members. The total production scale of member units in 2011 was 92 billion yen (equivalent to 7.36 billion yuan). The changes in output value in the past 10 years are shown in the attached drawings. When talking about the market situation, he said that Japan's construction industry and stone industry continued to decline in the past 10 years, resulting in the continuous decline in demand for diamond circular saw blades. The poor performance of solar and semiconductor fields in 2012 led to a sharp drop in demand for diamond wire saws; mineral exploration The flat panel display and mobile phone industries have a rising trend, and the automobile and aircraft manufacturing industries also have an upward trend. The situation in the whole industry began to improve in September this year. When Secretary-General Li Zhihong introduced China's situation, he said that we have 200 member units, 1 director unit, 16 vice president units, 19 standing director units, and 27 governing units. Each year, a board meeting is held to summarize the previous year's meeting. Work and research determine the work plan for the next year; hold a general meeting every year to discuss the direction of industry technology development, hold one international superhard materials and products seminar every five years; and various irregular conferences to study individual issues . The Association Secretariat edits and publishes 6 issues of the domestic and international publicly published magazine "Diamond and Abrasives Engineering", 12 information monthly magazine "abrasives and abrasives", 4 issues of "China Superhard Materials", 1 technical development. Forum Proceedings, 1 "China Abrasives Industry Yearbook". The member units cover major manufacturing companies. According to estimates, the total production scale of China's superhard materials industry in 2011 was about 56 billion yuan. The enterprises producing diamond and cubic boron nitride abrasives are concentrated and the statistics are relatively complete. In 2011, China produced 12.4 billion carats of synthetic diamond, accounting for more than 90% of the world's total output, and 343 million carats of cubic boron nitride, accounting for the world's total output. More than 60%. Due to China's too large, all kinds of super-hard material tool manufacturers are widely distributed, the statistics are difficult, and the data is incomplete. Therefore, the output value is about 51 billion yuan. China is the world's largest producer and largest market for superhard materials and products. From this exhibition, we can see that the level of tools for producing super-hard materials in Japan is higher than that of China. The products of the two countries are highly complementary, and there is a lot of room for exchange and cooperation. It is expected to continue to deepen the friendship between the two associations for more than 10 years. Communication, which is beneficial to the mutual promotion and common improvement of the members of the two countries, is a long-term work of mutual benefit and win-win. Next year is the 50th anniversary of the birth of China's synthetic diamonds. We will hold the 6th Zhengzhou International Superhard Materials and Products Seminar in Zhengzhou from November 14 to 17, 2013, and will assist the Zhengzhou Municipal People's Government and this The chairman of the board of directors held the "Second China International (Zhengzhou) Abrasives Grinding Exhibition" at the same time. We sincerely invite the Japan Industrial Diamond Association to be the co-organizer of the conference. We sincerely invite the president to lead the Japanese business elite to attend the conference. And exhibitions. President Chuanxiong expressed support for the large-scale activities of Chinese counterparts. After the exhibition, the board of directors will hold a discussion on the matter and tell the Chinese in time. The two sides also exchanged views on matters of mutual concern. After a brief exchange, the mutual understanding has been further enhanced and the relationship between the two conferences has been deepened. Both sides hope to continue to maintain friendly exchanges, support each other in major events, and build bridges between exchanges and cooperation among member units to promote mutual cooperation between the two countries. Healthy development. .jpg)
Forum of the two countries .jpg)
After the discussion, the group photo (Left 4 Li Zhihong, Zuo Wuchuan Yu Yifu) During the exhibition, the Secretary-General also paid a visit to the new president of Japan’s Tomei Diamond Co., Ltd. Shijie Hongzhang and Vice President Sugimoto Hiroshi, and learned that the company has more than 20 tons of The domestic two-side top press specializes in the production of Ф60mmPCD and PCBN. The maximum production capacity is Ф100mm. The diamond and cubic boron nitride abrasives used and sold are basically from China. The company also produces large diamond single crystals by CVD. When the Secretary-General showed him the 5-carat large single crystal produced by China using the six-face press, Mr. Sugimoto was very surprised, even claiming that the technology of the Chinese counterparts was progressing fast. The Secretary-General is also very busy at the exhibition. He not only pays attention to the exhibits of his peers, but also has an insight into the development direction of product technology. He also has a purpose to visit new and old customers and work hard to visit and negotiate trade with customers. All members have different degrees of harvest, some have signed new trade contracts, and some have clarified the direction of product technology in the future. Everyone is satisfied with the group's participation in the Japan exhibition. .jpg)
.jpg)
Statistics on Japan's domestic superhard materials tools (Source: METI) (Unit: million yen)
The 26th Japan International Machine Tool Show (hereinafter referred to as JIMTOF2012) was jointly organized by Superhard Materials Branch, Abrasives Branch and China Automotive Industry International Cooperation Corporation (hereinafter referred to as China National Automobile Corporation) on 2012.11.1~7. 3 super-hard materials companies set up exhibition booths, namely Henan Fenike Superhard Materials Co., Ltd., Zhengzhou Zhongnan Jiete Superhard Materials Co., Ltd., Henan Yuxing Huajing Micro Drill Co., Ltd.; 4 superhard materials enterprises and A general abrasive company visited the exhibition and met with new and old customers. They are: Beijing Wald Superhard Tools Co., Ltd., Henan Huifeng Diamond Co., Ltd., Hebei Presman Diamond Technology Co., Ltd., Qingdao Sisha Taiyi Grinding Co., Ltd. Company, Zhengzhou Hongji Grinding Technology Co., Ltd.