Sliding door installation tips

Sliding doors This form of decoration was introduced into the homes of the people 10 years ago and was widely welcomed. However, there were no professional sliding door manufacturers at the time, all of which were handmade by the decoration company, and the quality of the pulleys and slides was not reliable. Problems such as deformation of the door panels, poor sliding and pulling, and serious noises have occurred, which have greatly damaged people's enthusiasm for using sliding doors.

Nowadays, due to the appearance of professional sliding door manufacturers, sliding doors have once again become a hot spot for consumption. Experts have provided relevant tips on purchase and installation precautions.

Tip 1: After the completion of the renovation, the installation of the sliding door can be said to be between the building materials and furniture. The location of the installation of the sliding door should be considered during the decoration design, and the size should be measured and reserved during construction. In order to ensure the overall style of the decoration design, it is better to set the brand and style of the sliding door before the renovation. After the painting of the floor and the wall is completed, the manufacturer shall measure and customize the door. Experts remind consumers not to estimate their own size, must take professional measurements, otherwise there will be more than 5 mm error is difficult to make up for.

Tip two: The door panel does not deform to see the thickness, the border of the cabinet doors in the home are generally under the floor next to the ceiling above the ceiling, so that in addition to clean and beautiful will not dust, easy to clean. But will such a huge door be deformed? Experts told us that the door panels are made by special processes and generally do not deform. In addition, the sliding door in the factory uses rivets to tightly fix the four aluminum alloy frames on the door panel, so that the door panel is under external force. Will not be deformed. Usually thicker door panels are not easily deformed. For example, doors 10 mm thick and 5 mm thick are not easily deformed.

Tip 3: Sliding smoothly or not Looking at hardware materials Experts say that whether or not a sliding door can be easily opened and smoothly slides depends on its hardware: the upper and lower rails and the upper and lower pulleys. Each time the opening pulley slides in the upper and lower rails, the upper and lower rails High strength and no distortion. The wheel is the highest technical content. The entire weight of the door is borne by the bottom wheel. Its strength and bearing capacity determine the life of the sliding door.

At present, the brands on the market are relatively high grade. Their bottom wheels are made of glass fiber as the main raw material. The sealed ball bearings and special silicone grease are embedded in the center of the wheel to provide lubrication and ensure smooth sliding of 100,000 times. The wheels of low-grade sliding doors are usually toughened, and they are easily deformed after a long time, which affects the sliding effect.

Construction Acceptance Decoration Design Decorative Glass Home Decor Style Decoration Style Cabinet Doors Technology Glass Home Cabinet Glass Door Glass Furniture Glass Sliding Door Cupboard Door Glass Door Door