Shower room installation Raiders shower room installation considerations

The most important part of installing a shower room is of course comfortable and convenient to use. If the service life can be extended, of course, it needs to be included in the scope of thinking. So, how to install the shower room? What should you watch out for when installing a shower room ? The following Xiao Bian will take everyone to understand the shower room installation Raiders and shower room installation precautions.

Shower room installation Raiders

1, ready to use the necessary tools.

2, the installation of the bottom basin: a good combination of bottom basin parts, adjust the level of the bottom basin to ensure that no water in the basin, pelvic floor. The hose can be telescopic with the distance, connecting the pelvic floor with the floor drain.

3, test, protection: After the installation of water testing, in order to ensure the smooth flow of water. 4. Finding and punching holes: Use a pencil and a level rule to determine the drilling position of the aluminum material against the wall, and use the impact drill to drill holes.

4. Install aluminum: Knock in the rubber at the drill hole and lock the aluminum bar to the wall with screws.

5, fixed glass: The glass clamped locked in the hole in the bottom basin, and then fixed with screws.

6. Install the top tube: Find the corresponding position above the fixed glass drill, install (straight/oblique) holder and connect the top tube. Fix it to the top of the glass with a bender sleeve.

7. Secure device racks: Position the device racks, tighten the plate nuts, and fix the plate glass to maintain vertical and horizontal positions. Pay attention to waterproofing under fixed glass aluminum.

8. Install the door: Install the hardware of the door and install the hinge on the reserved hole of the fixed door. After loading, adjust the position of the axis of the lotus leaf until the door feels best.

9, do a good job of waterproof: In accordance with the requirements of the glass on the side or below the installation of suction or water blocking strips. Seam the aluminum with the wall, the glass and the bottom pot joint seam tightly with silicone.

10. Debugging and tightening: Check whether each part is comfortable and smooth, and find that the problem should be adjusted in time. After adjusting, tighten the corresponding screws to make the shower room more secure.

11. Closing work: The aluminum strip will be stuck in the wall aluminum to ensure its neat appearance. Finally wipe the entire shower room with a rag.

Shower room installation precautions

1. The pre-embedded hole size of the shower room should be designed before the bathroom is not renovated.

2. The best customized shower room with water supply system and tiles installed.

3, wiring leakage protection switch device, etc. should be considered before the installation of the shower room, so as not to rework.

4. The style of the shower room is determined by the layout of the bathroom. Commonly used are the corner type and the type one.

5, install the shower room should be installed strictly according to the assembly process.

6, shower room must be firmly connected with the building structure, can not shake.

7, open shower room must use expansion bolts, and non-hollow wall fixed, drainage, the bottom basin of memory water is not more than 500 grams.

8. The appearance of the shower room after installation needs to be clean and bright. The sliding door and the sliding door are parallel or perpendicular to each other. The symmetry is symmetrical. The sliding door must be opened and closed smoothly, seamless, and water-proof. The shower room and the bottom basin are sealed with silicone.

The above about the shower room installation Raiders and shower room installation precautions are briefly introduced here, and I hope to help you. For more information, please visit this website. Stay tuned.

shower room

Old salts of inorganic or inorganic compounds, minerals, in the biological cells typically accounts for 1% to 1.5% of fresh weight, the human body has been found more than 20 kinds, including a large number of elements have a Ca Ca, P, P, K K, S S chlorine, Na, Na, Cl, Mg Mg, trace elements have a Fe of iron, zinc, zinc, selenium Se, Mo Mo, fluorine cobalt chromium, Cr, Co, iodine I F, etc.