Plastic floor classification and its characteristics

There are two types of plastic flooring, PVC sheet flooring and PVC block flooring. PVC vinyl sheet flooring is based on polyvinyl chloride vinegar as the main raw material, plus appropriate additives, on a sheet of continuous substrate, produced by the coating process, divided into PVC foam with a substrate There are two types of dense floor sheets and dense polyvinyl chloride sheet flooring with a substrate. The width is 1800 mm, 2000 mm, and the coil length is 20 mm, 30 mm, and the total thickness is 1.5 mm, 2 mm.

PVC vinyl flooring is suitable for the laying of living room and bedroom floors (mid-range decoration). The selection of materials should be excellent products or first-class products.

The area required for coil flooring can be calculated by multiplying the laying area by 1.10. If the width of the coil floor is exactly the clear width of the room, 2% of the loss can be taken into account. The floor of the coil can be retailed, and how much it needs to be purchased. The plot should be carefully planned to avoid waste.

PVC block floor is based on polyvinyl chloride and its copolymer tree vinegar as the main raw material, adding fillers, plasticizers, stabilizers, colorants and other accessories, produced by rolling, extrusion or extrusion process, there is a single Layer and homogeneous composite two. Its size is 300 mm x 300 mm and its thickness is 1.5 mm.

Each floor area is 0.09 square meters and the block floor loss rate is 2%.

The coiled floor is wrapped with a wear-resistant layer rolled on the core and packaged in corrugated boxes. The name of the product, the name of the manufacturer, the date of manufacture, the lot number, grade, color, quantity, weight, etc. shall be indicated on each roll or box. No impact, sun exposure, or rain may occur during transportation. The indoor storage air must be circulated and dried. It must not be less than 1m away from the heat source. Coiled floors should be piled upright.