Yu Ou Nuo Rock Wool Color Steel Plate and its production process realize the combination of rock wool and steel plate into a whole through automatic equipment in the factory, thus changing the previous way that rock wool plate needs to be compounded on site. On the premise of meeting the requirements of building thermal insulation, sound insulation and fire prevention, it achieves the goal of high quality, high efficiency, reliability and safety. The product has been widely used in Europe and has been mature and perfect. Rock Wool Insulation Color Steel Plate,Rock Wool Sandwich Color Steel Panel,Rock Wool Sandwich Colored Steel Plate,Rock Wool Board With Color Steel Zhengzhou Ou Nuo Building Materials Co., Ltd. , https://www.yuounuo.com
When a vehicle with a specific vehicle identification card is installed close to the parking space, the arm of the parking lock is automatically lowered to allow the vehicle to enter; when the vehicle equipped with the vehicle identification card is far away from the parking space (about 40m), the parking lock The arm is raised to prevent other vehicles from entering.
The parking lock can also detect if there is a vehicle in the parking space. Parking locks will transmit information such as the status of the parking lock to the base station at a certain interval, and will be uploaded by the base station to the back-end computer of the parking management. 
The location of the installation is to select outdoor dry and dry concrete floor, and place the parking lock in the middle of the entrance of the parking space so that the car will not be rolled into the parking lock when entering the parking space normally.
Installation method Pull the parking lock arm upright and then use the key to open the lock on the top cover and lift the top cover.
According to the position of the three mounting holes on the parking lock foot, three holes with a diameter of 12mm and a depth of 50mm are drilled and the M8 expansion bolt is driven.
Three sets of equipped gaskets are put on the bolts, then the parking lock is installed, and the nuts are tightened and tightened.
Place the battery in a specific position of the parking lock, take the corresponding vehicle identification card to a remote place (40m away from the open space), and insert the battery's plug into the corresponding socket.
Cover the parking space with the cover, then lock the cover and insert the antenna into the antenna holder.
The corresponding vehicle identification card is taken near the parking lock, and the parking lock arm is lowered, indicating that the parking lock has been installed successfully.
The vehicle identification card is preferably stuck to the back of the vehicle's interior rearview mirror or the middle of the upper edge of the front windshield.
Method of Use The vehicle identification card is installed on a specific vehicle. When the vehicle approaches the parking lock, the arm of the parking lock is lowered. When the vehicle is away from the parking space, the parking lock is raised.
Inductive parking lock is a kind of electromechanical integrated smart parking lock (hereinafter referred to as parking lock). It is often used in personal parking management and parking space management to prevent parking spaces from being occupied. Compared with the traditional parking lock, the trouble of getting off the switch lock is eliminated, and the remote control is avoided, and the parking space is not occupied again for forgetting the remote control, thereby saving time and labor.