IHF-lined fluorine plastic centrifugal pump for the single-stage single-suction fluoroplastic alloy chemical centrifugal pump, it has a corrosion-resistant, wear-resistant, high temperature, no aging, high mechanical strength, non-toxic decomposition, Wide temperature, the transmission medium temperature is -85C ~ 200. C and other advantages. So in possession of so many advantages at the same time, the technical parameters of the pump What is the following is about IHF-lined fluorine plastic centrifugal pump technical parameters. IHF lined fluorine plastic centrifugal pump technical parameters 1, the flow rate: 6.3 ~ 400m3 / h; 2, lift: 5 ~ 132m; 3, speed: 2900,1450r / min; 4, power: 0.55 ~ 110KW; : 50 ~ 200mm; 6, the maximum working pressure: 1.6Mpa. Read more: China Building Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Industry Interconnection (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http://beng.liuti.cn/ (service hotline:)
During the process of road work, drop glass bead onto the road line painted with thermoplastic paint which is heated to certain temperature while the paint is still wet, thus to increase the reflectivity of road marking. According to the specification of Communication Industry Standard of the People`s Republic of China No. JT/T446-2001, the granulometry for drop on glass bead is shown in the table below:
Other parameters keep conformity with the type of intermix.
The glass bead can be produced based on the standard of countries or areas, such as EN1423/1424, AASHTO M247, BS6088, JIS R3301 and KS L2521 etc.
Drop-on Glass Beads
Drop On Glass Beads,Drop-On Glass Beads Road Marking,Reflextive Drop On Glass Beads,Drop On Glass Beads Jewellery Marking
CHIYE GLASS BEAD (HEBEI) CO., LTD , https://www.chiyeglassbeads.com
