How to lay kitchen tiles?

First, before the paving:

1. The size of the kitchen and floor tiles should not be too large. The overall size is too large and the overall feeling is not coordinated. At the same time, it is not convenient to install floor drains. Generally, kitchen and bathroom tiles are mostly 300*300 or 330*330.

2. Plan the bricks before paving, try not to appear less than one-third of the narrow columns. It is necessary to process and cut, and it is better to leave more than two-thirds of the tiles after cutting.

3. Before the paving, confirm the tiles used in the kitchen and bathroom walls to prevent the kitchen tiles from being confused, so as to avoid the mistake of putting the kitchen tiles on the bathroom.

4. The front wall of the bathroom should be waterproofed. If the wall tile is used first and then the floor tile is applied, it is necessary to do another water shut-off test before laying the floor tile.

5. Before paving, remember the route of the wall and water pipes and wires. It is best to keep the traces of the circuit and waterway so that it can be easily found in the future.

6. Kitchen tile If you choose the waistline and tile, you should consider the position of the tile waistline. The waistline is on the cabinet on the cabinet. The position of the tile should be considered in the position of the cabinet pendant and the hood. Do not install these objects. It was blocked. Affect the overall coordination and aesthetics.

Second, when paving:

7. The cement used for pasting kitchen tiles is 425 cement. The mixing ratio of cement sand should not be greater than 1:3. If the cement content is too heavy, the crack will be caused by the high expansion coefficient of cement, which will reduce the service life of the tile. .

8. If the glazed wall tiles of kitchen and bathroom use cement mortar as the bonding agent, the tiles need to be smeared after soaking in water. The time of soaking water is suitable for the time when the tiles are completely immersed without bubbling, generally 30 minutes. That's it.

9. Paving kitchen and bathroom tiles, whether or not they belong to seamless bricks, must be seamed. It is recommended to be no less than 1mm. The ordinary wall tiles should be 1.5-2mm, and the antique brick gaps can be properly widened.

10. The height of the kitchen wall tiles should be higher than the height of the ceiling, generally not less than 10 cm.

11. Pay attention to the texture of the tile when laying the tile, and make it smooth with the texture. The front and back of the tile waist line should pay attention to its direction, do not stick it down, and the texture of the tile waist line is consistent with the texture of the brick.

Third, after the paving:

12. The joints need to be dried after the tiles are dry. It is usually carried out after 24 hours.

13. After the floor tiles are laid, you must wait for the ground to dry before you can walk on the brick surface or carry out other kitchen and bathroom renovation projects.

14. After the tile is laid, check it. If it is found that there is an empty drum, it is better to repair and resurrect the problematic place.

15. It is necessary to pay attention to the strength of the wall surface punching. It is better to spray water at the same time as the hole punching for cooling treatment to prevent the tile from bursting due to the severe temperature difference of the tile in a short time.

16. When drilling the wall, be sure to check if there is an empty drum. Also check the pipeline diagram of the retained hydropower transformation and do not hit the pipeline.