Anti-static activities floor detailed classification, advantages, purchase all have

Because people wear shoes when they walk and the floor generates static electricity, charged ions will attract dust on the floor surface of the air, for the computer room, electronics factory and other units will have a certain impact. In order to solve this problem, anti-static raised floor appeared. Then Xiao Qi introduced the advantages of anti-static raised floor and how to purchase anti-static raised floor.

First, anti-static activity floor classification

Anti-static raised floor is generally divided according to different substrate and veneer materials. Base materials are steel base, aluminum base, compound base, particleboard base (wood base), calcium sulfate base, etc. Veneer materials are anti-static tiles, melamine (HPL), PVC and so on. There are also anti-static plastic floor, OA network floor and so on. The following is a brief introduction of several types of floors commonly used in the market.

1, ceramic anti-static floor

The use of anti-static tiles as a surface layer, composite steel floor or cement particle board, surrounded by conductive rubber edge processing (the ceramic floor without plastic strips easy to fall away when bumping porcelain). It has the advantages of stable anti-static performance, environmental protection, fire protection, high wear resistance, high life (30 years of service life), high load (uniform load of 1200 kg/m2), waterproof, moisture resistance, and good decorative effect. Class room. The disadvantage is that the floor itself is heavier (a floor of 15kg or more), which has a certain influence on the load-bearing of the floor; in addition, professional installation workers are also required to install it, otherwise the installation will be uneven.

2, all steel anti-static floor (non-standard and national standard two)

The use of highly wear-resistant melamine HPL fireproof panels or PVC as the surface layer (in the northern part of the country because of the dry climate, it is not easy to use HPL fireproof panel veneers), steel shell structure base material, in addition to whether there are black plastic strips and there are no edges and edges The points.

The advantages of the all-steel floor is that the construction is convenient, there is no gap problem after installation, and the replacement is convenient. The disadvantage is that the surface layer material is not wearable, the service life is short, and the skin angle is easy to change, and it will be replaced in a few years.

3, aluminum alloy anti-static floor

The product is made of high-quality cast aluminum. After being stretched and shaped, the surface layer is made of highly wear-resistant PVC or HPL veneer and electrically conductive adhesive. It has the effect that the substrate is not rusted and used repeatedly, thus effectively solving the composite floor. And all steel floor product defects, but tailor-made high-grade anti-static flooring, but its cost is too high.

  

Second, the advantages of anti-static floor activities

1, to simplify the installation, and provide greater flexibility for future changes in the device configuration and expansion;

2. The equipment in the equipment room can be connected with free electrical appliances under the anti-static floor, which is convenient for laying and maintenance, so that the machine room is clean and beautiful;

3, it can protect a variety of cables, wires, data lines and sockets, so that it is not damaged;

4, the room can use the space under the floor as a static pressure air-conditioned air storage, get a satisfactory airflow organization. No matter where the computer equipment is installed, air-conditioned air can be obtained through the air outlet of the anti-static raised floor.

  

5, is conducive to the bottom of the equipment maintenance and maintenance;

6. Eliminate the harm to the human body caused by cable exposure;

7, can use the adjustable nature of the anti-static floor to eliminate the unevenness of the ground to ensure the overall level of the engine room floor;

8, can make the static charge leak to the ground, and reflect the electromagnetic radiation.

Third, anti-static floor activities to buy

1, carrying capacity

The whole piece of anti-static raised floor is installed on the lapped cross beam, and the adjustable support is leveled. Its load carrying capacity should be: uniform load> 1000Kg/m2, concentrated load on any part of the floor is 400Kg, and the diameter is 6cm. When the loading point is subjected to a load of 300 Kg, the deflection should be less than 2 mm and there is no permanent deformation. The adjustable floor of the movable floor should be able to withstand more than 1000Kg of vertical load.

2, wear resistance

The surface of the raised floor should be hard-wearing and long-term use without wear scars. When the rubber casters of computers and other equipment slide on the floor, they should not leave any traces of friction or break.

Read the above small to give us a presentation on anti-static floor, I believe we have a deeper knowledge and understanding of anti-static floor. If you still want to learn more about the relevant information, you can pay attention to this website decoration information channel.

Floor Kendi floor