In the modern home decoration, the application fields of wall tiles are more and more extensive. However, if the wall is usually long, or if the humidity of the wall is high, the tiles can easily crack, fall off, and fall off. This not only affects the use of results, but also leaves a piece of unsightly "scars" on the complete wall and ground. If you encounter this situation, you may wish to use the following methods to repair: First, if the mortar is not loose, only the tiles fall off. After the mortar on the back and around the tiles are scraped off, a little cement is added into the 107 glue to form a paste, and a thin layer is evenly coated on the back of the tile. , press the tile later to stick firmly. 2. If the mortar is dropped together with the tiles, first lightly plucking some of the pits on the original foundation surface, re-embedding with mortar mixed with 107 glue, or using cement, E-44 epoxy resin, acetone, ethylenediamine (Available at the chemical store) After mixing at a ratio of 5:3:2:1, brush a layer on the base surface with a brush and press the peeled tile up until the mortar hardens. It should be noted that if the tiles only partially fall off, do not use force to hit the mortar on the foundation surface to prevent vibrations and loosen the original solid tiles. Tiles Tiles Entrance Concealer Cement Home Decor Tiles Home Decor Home Decor Tiles
There are many kinds of protective gloves. In addition to chemical resistance, there are also anti-cutting, electrical insulation, waterproof, cold resistance, thermal radiation protection, fire retardant and other functions. It should be noted that the general acid and alkali resistant gloves are not the same as the chemical resistant protective gloves. So when needed, you should choose protective gloves that prevent all kinds of chemicals from penetrating.
The correct use of
safety gloves and goggles,safety gloves electrical work,safety gloves for woodworking,safety gloves rubber Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com
Smic tiles
1. Check whether the gloves are damaged before each use
2. Wear protective gloves before handling harmful substances or operating dangerous procedures
3. Avoid exposure of pollutants and contact with the skin after removing the contaminated gloves
4. Contaminated gloves should be wrapped before being discarded
5. Reuse protective gloves should be thoroughly cleaned and air-dried after use
6. Choose gloves of the right size
Maintenance method
1. Put protective gloves in a dry, dark and constant temperature environment
2. When there are a large number of chemical substances remaining, use appropriate solvent to clean, but avoid using corrosive cleaning fluid
3. Dry the gloves thoroughly after washing. Do not use heat to dry the gloves unless instructed by the manufacturer, as it will age the gloves quickly
Proper use and maintenance can properly increase the service life of protective gloves.
