An impact drill is a conventional power tool designed for drilling in concrete, stone and similarly hard materials. These impact drills come with an impact mechanism that the maximum impact rate can reach up to 48000 individual impacts per minute. It also comes equipped with SDS drill shank.
Impact Drill,Right Angle Drill,Hand Drill,Electric Impact Drill AWLOP CO.,LTD , https://www.awlop.com
Looking back at 2010, looking forward to 2011, what is the history of China's hardware industry, and where will it go? Too many stories, too many storms, too many wonderful, a lot of hardware rings to take you back to this ups and downs of 2010. Based on the market data of the hardware industry and the market-related dynamics, Xiaobian summarized and summarized the hot search products in the hardware industry in 2010 as follows:
Popular search products: hardware tools, fasteners, tools, molds...
The following is a brief analysis of the hardware industry search data rankings:
electrical tools
Most of the Power Tools sold worldwide are produced and exported from China. China has become the world's leading supplier of power tools. While the power tool industry is developing, some problems are becoming more and more obvious. In particular, the reform of the scientific research and development system is progressing slowly, the gap with foreign countries is obvious, the export products have low foreign exchange earning, the performance level is low, the selling price is low, the scale of the enterprise is small, the concentration is low, and the raw material price increase factors seriously restrict the further development of the industry. Quality improvement. Power tool enterprises must seize the new development situation, increase scientific and technological innovation, actively carry out product certification, accelerate the technological transformation of enterprises, improve supporting measures, actively create conditions, absorb foreign capital, and promote corporate asset restructuring. Only in this way can the new situation be under the new situation. never fail.
Pneumatic tool
The market for pneumatic tools is favored by the merchants. On the one hand, its technical requirements are relatively high, the use of pneumatic tools is becoming wider and wider, and the after-sales service is further improved, which has dispelled the fear that the products are broken in the past. â–¡ Concerns have further stabilized the sales of pneumatic tools. However, because its market price is generally higher than that of electric tools, it has become one of the main reasons why pneumatic tools are not widely used. However, according to the business households, as the domestic production technology continues to improve and mature, the price of pneumatic tools will gradually decline.
hand operated tools
Most of the domestic manual tool companies are based on low-end products or OEM, and high-end products and brand products are still controlled by European and American countries. Also, because the profit margin of manual tools is being compressed, the space for price reduction is decreasing day by day. It is difficult for enterprises to establish core competitiveness by price competition alone, and new development paths should be explored. Only the company guarantees the stability of product quality, and at the same time guarantees the integrity of the company, can get the customer's letter. Although the user will consider the price factor in the choice of tools, according to the survey, quality is the most important factor for users to consider. If you have a place, it is also crucial to expand the influence of your own brand and improve product quality. In the case of good products and guaranteed quality, proper brand promotion is particularly important, and after-sales protection. Many domestic and international after-sales services are not in place, or basically no after-sales service, which has become a major weakness of ours. In the face of increasingly fierce market competition, if domestic enterprises do not pay attention to this, it will affect their long-term development, and doing good sales is also a top priority.
fastener
China is the world's largest manufacturer of fasteners. When China's auto fasteners brand became weak, multinational companies and joint ventures once became the spokesperson for the profit of the automotive fastener industry. They have the ambition to earn higher profits. . However, their "good days" will naturally leave one day. The market for Chinese automotive fasteners is so large that Chinese automobile fastener companies have no reason to give up their ownership and let them be divided by foreign businessmen. Chinese fastener companies have begun to work hard to improve themselves, and China will certainly have a strong self-owned brand of automotive fasteners in the future.
For multinational fastener companies, the Chinese market is still one of the most promising markets in the world. Even with stricter laws and regulations and industrial policies, there are still more market opportunities than other countries. No multinational company is willing to give up this market, and no joint venture is willing to self-improve.
The competition in the automotive fastener market is becoming more and more fierce. The times are different. China's automobile fastener enterprises are entering the “quality, brand and variety†project with quality as the core, insisting on high starting point, high quality and high goal. Across the development, there should be a breakthrough in the manufacture of high-margin automotive fasteners.
Tool
China's tool technology level is about 20 years behind the developed countries. There are many reasons for the current status of China's tool industry, such as cheap labor, low cost, lack of service power, etc., all affect the development and improvement of the cutting tool industry. In order to narrow the gap with industrialized countries, China's tool companies must strive to improve the quality of personnel, accelerate the development and application of key technologies, and improve after-sales service.
Machine tool mould
With the rapid growth of a large number of industry asset investment, the demand for machine tools is greatly increased, coupled with favorable factors such as national industrial planning and fiscal and tax preferential policies, the development momentum of China's machine tool industry is unstoppable. On the whole, China's machine tool industry has entered the first phalanx of the world. Some analysis is now made on the main aspects such as total supply capacity, product range and performance level, R&D strength and technology development, and information technology application status in enterprise management.
According to Qin Hao, deputy secretary-general of China Die & Mould Industry Association, the machine tools used by domestic mold companies can be divided into electric machining machines and gold cutting machines. Among them, the share of electric machine tools in the domestic market is still relatively high. However, the gold cutting machine is not the case, because the machine tool for the mold has higher processing requirements than the part processing, such as in the numerical control system, transmission equipment, precision parameters, etc., which brings great difficulties to the development and design of domestic machine tool enterprises. . In addition, because the production of mold equipment requires machine tool enterprises to increase investment, but also need to adjust the production line to meet the requirements of mold production, which is one of the reasons why many domestic machine tool enterprises are not very keen on the mold market.
In 2010, we rushed past, and we either experienced it personally, or as a bystander, we watched the big things happening in the hardware industry every moment. Looking back at the overall development of the hardware industry in 2010, it can be described as twists and turns. During the year, China's hardware industry experienced a series of storms such as anti-dumping, export-to-domestic sales, rising salary, lack of labor shortage, brand war, etc. However, driven by the “Eleventh Five-Year Planâ€, By actively investing in the construction of the hardware industry, the overall development is still better and faster.