Entrance decoration restaurant decoration formaldehyde interior decoration furniture heating decoration The utility model discloses a Kitchen Shower head that is convenient to switch the water outlet mode, has a compact structure, and is easy to use, and a kitchen faucet using the kitchen shower head. , The shower head is provided with a water separator, and the water separator is provided with an annular flow channel and an inner flow channel respectively connected to the spray water outlet body and the V-shaped water outlet body, and the lower end of the outer wall of the water separator is upwardly circular A plurality of water inlet holes connected to the annular flow channel are provided, and a first sealing ring is provided on the lower side of the water inlet hole; the water outlet end of the shower body is connected with a converter, and the converter is provided with a communicating In the water diversion cavity at the water outlet end of the shower body, the lower end of the water diversion device is installed in the water diversion cavity and can move up and down, and the upper end of the inner wall of the water diversion cavity is provided with a convex ring matching the first sealing ring, so The bottom surface of the water diversion cavity is provided with a sealing gasket that can seal the inner flow channel. Waterfall Shower Head,Overhead Shower Head,Push Button Hand Shower,Brushed Nickel Sink Faucet Yuyao Zelin Sanitary Ware Co., Ltd , https://www.kitchen-sinkfaucets.com
The first is to reasonably determine the amount of use. Generally, about 100 square meters of room area do not use more than 30 large core panels, but also consider other items, such as furniture, wood floors, etc., if too much will cause excessive formaldehyde.
The second is to do a great deal of core board finishes. According to the national "Restriction of Harmful Substances in Wood-based Panels and Products made of Indoor Decoration Materials," the large core boards with a formaldehyde emission of not more than 5 mg per litre must be treated before being allowed to be used indoors.
The third is to purify and close the large core panels that cannot be finished, especially the back sheets of interior decoration projects, various kinds of cabinet inner panels, and heating covers. You can consider purchasing some aerosols that eliminate and seal formaldehyde on the current market, and use them best in the decoration.
The fourth is the detection and purification of formaldehyde in the indoor air after renovation. Do not rush to stay in the renovated room, it is best to find relevant departments to conduct inspections, listen to the views of experts, select the right check-in time.
When using large core boards, attention should be paid to the following aspects to minimize formaldehyde emission.