Winter decoration needs attention

In winter, there is a large temperature difference between the interior and exterior. Whether it is a wall brick or a floor tile, be sure to wait until it is suitable for the indoor temperature, so as to avoid emptying or falling off after construction. In addition, the paving of wooden floor should pay special attention. If the indoor temperature is relatively high, the gap between the wooden floors should be as small as possible. On the contrary, if the indoor temperature is relatively low, the gap between the boards and the boards can be larger.

The wood is best placed in a room with heating equipment for 3 to 5 days to evaporate the moisture produced by the temperature changes, so that the moisture content of the wood is close to the level of the house, some of the accessories wood like wood keel, wood, gypsum board, etc. If the mold grows after being exposed to moisture and cracks and deforms, this should be avoided as much as possible.

Sixth, strong cold air can't immediately open the window after struck or snowed

Although it is a warm winter, it only means that the average temperature in winter is higher than normal, which does not mean that there will not be strong cooling weather. Therefore, special attention should be paid to the construction of paints at low temperatures and the ventilation of windows after melting. Application temperature should be higher than 5 °C. Since the ambient temperature of the coating application should not be lower than 5°C, the construction of the winter decoration should first close the doors and windows to ensure that the indoor temperature is at least not lower than 5°C. In this way, on the one hand, the indoor temperature can be guaranteed, and on the other hand, outdoor sand blows to the undried furniture and wall surfaces, and rough unevenness can be avoided. In warm winter rain and snow, because the temperature of the surrounding buildings (especially the ground) is high, the snow reaches the ground immediately and it is not easy to form snow. In such an environment, it is necessary to open the window for ventilation. After the paint is fully dried, open the doors and windows again for ventilation, and pay attention to the time.

Seven, there can be no ice cubes in the tiled sand

The low temperature in the winter will have a greater impact on the strength of the concrete and cement mortar after solidification and solidification, which will lead to a decrease in the quality of the project. Maintaining the indoor temperature is the key to this procedure. However, the general home decoration project seldom involves civil works, so this problem is not very common. The sand should be carefully sieved, no ice cubes can be added, and antifreeze should be properly added. When stirring the mortar, the temperature of the water should not exceed 80°C. With the use of groundwork, the maintenance time for the bricklayer construction is extended by 48 to 72 hours.

After the water and electric lines are slotted, the cement mortar used to fill the grooves shall be made of gas-hard (dry) mortar, and shall be scraped for wall work or other processes after 48 hours of filling (above 5°C room temperature). .

Eight, all the heat near the putty can not be too thick

Because the indoor air is dry and the water loss is fast, the putty before the oilwork cannot be scraped too thick, otherwise it is easy to cause empty drums, cracks, and wall inequality. Indoor cement mortar plastering, tiling and other processes, close to the heating, should prevent the local temperature is too high to cause the mortar to dry quickly to form cracks, tiles peeling and so on.

Nine, people have to close the window or it will freeze the heating

1: Protect radiator fins and pipelines during construction. Once the construction is damaged, there are hot water repairs.

2: Usually, the radiator is at the window. When the window is opened due to construction smell, pay attention to the person walking the window. Prevents freezing of radiators with open windows once the water is stopped at night

X. Abuse of antifreeze can easily cause indoor air pollution

Use antifreeze with caution. In winter construction, there is also a problem of the use of antifreeze. The use of antifreeze in building decoration can make concrete harden at negative temperatures and achieve sufficient antifreeze strength within a specified time. However, nitrite, the main component of antifreeze, can be poisoned if it is taken in excess. Therefore, in the winter decoration, other methods should be used to solve the problem of freezing.

In fact, as long as grasping the attention of winter decoration, winter decoration is still a very good choice, not only because the decoration company during the off-season construction will not be impatient, and many materials because the end of the year building materials business will also price promotions, this will not only improve the decoration Quality, but also save some costs.

Entrance decoration Children's room Renovation window Heating Room coatings Furniture decoration Looking for fit-out company How do you do Floor tile Kitchen tile Tile adhesive tile Price Floor tile Balcony tile Kitchen tile