Mechanical Diaphragm Metering Pump
As
the name suggests, Diaphragm Metering Pump using a special design and
processing of flexible diaphragm instead of the piston, under the action
of the drive mechanism to achieve reciprocating motion, complete the
suction - discharge process. Due
to the segregation of the diaphragm, the isolation between the metering
fluid and the driving lubrication mechanism is realized in the
structure. High-tech structural design and the selection of new materials has
greatly improved the service life of the diaphragm, coupled with
excellent corrosion resistance of composite materials, diaphragm
metering pumps become the main application of fluid measurement pump
type.
If you want to buy Mechanical Diaphragm Metering Pump,Inhibitor Scale Dosing Pump, Solenoid Diaphragm Metering Pump, Water Treatment Dosing Pump, Plastic Chemical Diaphragm Metering Pump, please contact us. Mechanical Diaphragm Metering Pump,Electric Mechanical Diaphragm Metering Pump,Chemical Dosing Pump,Chemical Mechanical Diaphragm Metering Pump,Inhibitor Scale Dosing Pump Zhejiang Ailipu Technology Co., LTD. , https://www.alipu.com
Formulated ammonium phosphate quick-acting compound fertilizer. Take 5 kg of large manure, pour it into a large iron pan, and put 0.2% to 0.5% of acid (sulfuric acid, nitric acid) into the appropriate amount to make it soak and ferment. After about 4 to 5 hours, 5 kg of human urine and 10 kg of chicken manure were thoroughly mixed and poured into a pot, and then 3 kg of superphosphate was added to the pot. Then heat the iron pan, stir it with a stick in the pot while cooking, and wait until the pot is dried. The ammonium phosphate compound fertilizer prepared by the above method has high nitrogen content and is suitable for crop topdressing.
Five-in-one quick-acting compound fertilizer. The plant ash and soft water (river water, pond water) are poured into the pot at a ratio of 1:10 to boil, and the impurities are filtered to obtain an aqueous alkali solution. The bovine bone powder and soft water were poured into the pot at a ratio of 1:7 to boil, and the impurities were filtered off to obtain a filtrate. A brine solution was prepared in a ratio of 1:3. The gypsum is placed in a stove and calcined at a high temperature, and then ground into a powder for use. First place 30% aqueous alkali solution in the pot. After boiling, pour 13% bovine bone water, 2% saline solution and 30% gypsum powder into the pot (when pouring, stir while pouring), boil Then cook for another 10 to 15 minutes, then pour the quicklime with the mixed solution (the quicklime can be stacked on the concrete floor) until the quicklime is powdery. According to the above method, each 50 kg of mixed raw materials can be made into 23 kg of 5-in-1 compound fertilizer, and the contents of nitrogen, iodine and potassium are 28%, 0.5% and 30%, respectively, and can be used as base fertilizer and top dressing.
ã€Comment】 ã€Print this article】 ã€Close this page】 ã€Large, medium and small】