Car Wash Brush,Car Cleaning Brush,Car Detailing Brushes,Car Wheel Cleaning Brush Foshan SUMEITE Grinding Technology Co.,Ltd , https://www.aedetail.com
First, the multi-layer soft and hard stacked ring fixed to the valve plate, when the valve plate normally open state of the sealing surface to form a positive erosion, sheet metal sandwich in the soft seal by the erosion, directly affect the sealing performance. Second, by the structural conditions of the structure does not adapt to do the following DN200 valve, because the overall structure of the valve plate is too thick, large flow resistance. Third, due to the principle of three eccentric structure, the seal between the sealing surface of the valve plate and the valve seat is pressed against the valve seat by the torque of the transmission device. The positive flow state, the higher the media pressure seal squeeze tight. When the flow medium countercurrent media pressure increases with the pressure between the valve plate and valve seat unit pressure is less than the medium pressure, the seal began to leak.